Hydaulics Awareness Training

We now carry out a Hydraulics Awareness Training Course to make Operators / Fitters aware of how hydraulics work and precautions to be taken.

Please contact the Office for further details.

OPERC

OPERC Safety Net Training - Quality Training Services can now offer this - please contact us for further details.

COURSE DURATION AND NUMBERS

The maximum number of operators we can train on a course is 3 and the laid down standards provide the following recommendations for the training of operators on any mechanical handling equipment - forklift truck, reach truck, etc.

A 1 day refresher course for up to 3 operators who have / had certificates.
(Yes, we will need sight of previous certificate or some other proof of training)

A 2 day course for 1 or 2 operators with experience of the truck but no certificates
A 3 day course for 3 operators with experience of the truck but no certificates

A 3 day course for 1 novice operator
A 4 day course for 2 novice operators
A 5 day course for 3 novice operators

We can also carry out conversion courses from one type of equipment to another - the equipment involved determines the number of day(s) needed.

Each trainee is issued with a certificate of training achievement to confirm they have been trained to ITSSAR Standards and we can also provide ID cards if requested - both included in any quoted price.

At QTS we provide a daily rate for training on your site - with no hidden extras - please contact Carol by phone or email for a quote.

Working Platforms (Non-Integrated) on Forklift Trucks

WORKING PLATFORMS (NON-INTEGRATED) ON FORKLIFT TRUCKS
Just a note to advise that Guidance Note PM28 (3rd edition) which refers to the abvoe - can be downloaded from the HSE site - or a copy can be obtained from this office (for the cost of printing and postage)

If Instructors or Employers have any queries please email carol@qtsuk.com or telephone 08456 123252

ITSSAR Instructor Courses and Instructor Re-Registration

Would you like to attend one of our 10 Day Courses and become an ITSSAR Accredited Instructor?

The cost of the 10 day course is £1000 plus VAT per candidate. This includes all training, paper work to be provided by QTS and Registration with ITSSAR.

Our next course will take place on 14 to 25 June 2010 at our offices in Morley.

To book a place or to request further details please e mail carol@qtsuk.com or telephone Carol on
08456 123 252 (0113 2527689)

You must have a Counterbalance Forklift Truck Operator’s certificate / licence and have undertaken a refresher course within the last 12 months.

Instructor Re-Registration or Direct Entry to ITSSAR from another accredited body .

The cost of this course is £500 plus VAT. This includes paper work being provided by QTS and Registration / Re-Registration with ITSSAR.

Our next course will take place on 21 to 25 June 2010 at our Offices in Morley.

To book a place or to request further details please e mail carol@qtsuk.com or telephone Carol on
08456 123 252. (0113 2527689)

If you need to attend a Re-Registration Course this year and the above dates are not convenient to you - please request details and dates of future courses. Please e mail carol@qtsuk.com or telephone Carol on 08456 123252 (0113 2527689)

We look forward to hearing from existing and potential new instructors.

NOTE FOR INSTRUCTORS

INSTRUCTORS URGENTLY REQUIRED FOR WORK IN VARIOUS AREAS

Interested ?

Please send email to carol@qtsuk.com with following details:

Name
Address
Telephone Numbers
ITSSAR Registration Number

Availability

Types of equipment you instruct on

Preferred areas of work

FORKLIFT POWERPOINT PRESENTATION

QTS understands that designing your own classroom based lessons can be quite time consuming and expensive which is why we are now offering this extensive presentation package to all instructors i.e. ITSSAR, RTITB, NPOS, CITB, AITT and LANTRA. This presentation has been designed by Instructors with over 40 years experience between them. It comprises of 548 slides and covers the following elements:

Need to Train
Health & Safety Law
Management of Health and Safety Regulations 1999
The Provisonal Use of Work Equipment Regulations 1998
Lifting Operations and Lifting Equipment Regulations 1998
Approved Code of Practice - Rider Operator Lift Trucks
Principles of Counterbalance
Rated Capacity
Stability
Stability Triangle
Hydraulics
Traction Batteries
Diesel /LPG Refuelling
Free Lift
Operators Safety Code
Loading / Unloading Vehicles

For more information or ordering your copy please contact Carol at QTS by phone or e-mail.

NEW COURSES

QTS is pleased to announce that we also carry out training on Mobile Scaffolding, Ladders and Working At Height Regulations.

We have also included the following onto our training programmes:
Confined Spaces, Hydraulics, Lawn Mower, Oxy Fuel Gas Cutting/Safety, Road Roller, Road Sweeper, Stihl Saw and Spillages.

We also carry out the Approved/ Appointed Persons Course in accordance with requirements of BS7121 Part 1.

We may have training courses available which are not listed - please contact the office for information.

WORKING AT HEIGHT REGULATIONS 2005

The new Work at Height Regulations (WAHR) came into force on 6th April 2005 - and include replacing the “two metre rule”. Until now, under the Construction (Health, Safety & Welfare) Regulations 1996, employers had to adopt specific fall protection measures - such as installing guard rails - if work was carried out at two metres or above. However, ministers accepted the HSC’s recent recommendation that this should be replaced by new guidance on working at heights over two metres, including detailed advice on how to comply with the law.

The HSE have published a free guide to the new regulations. This is available from HSE Books on 01787 881165.