ITSSAR Accredited Novice Instructor Course
Information : This is a 10 Day Course to ITSSAR Standards (Independent Training Standards Scheme and Register)
Pre-Registration Criteria
“Instructors need sufficient industrial experience to enable them to put their instruction in context and an adequate knowledge of the working environment in which the trainee will be expected to operate”
ITSSAR require that candidates must have passed the Accrediting Bodies Association Workplace Transport 2012 (ABAWT) full standard operator’s test. The operator’s certificate must have been issued in the previous 6 months. This training must have been carried out by an Instructor who is registered with one of the accrediting bodies; and must be available for verification by the TSA monitoring the course; this must be available from day 1 of the course.
Requirements :
1. A copy of the operator’s certificate of training achievement must be sent to QTS prior to attending the Instructor Course . The certificate must have been issued by an Accredited Training Company and confirm that they have attended a refresher course within the last 6 months.
2. Candidates attending the course must also have the desire to teach.
3. One passport size photograph
ITSSAR Accredited Instructor – Re-Registration Course
Information: This is a 3 or 5 day course – depending upon the number of trainees attending the course
Requirements:
1. A copy of the operator’s certificate of training achievement must be sent to QTS prior to attending the Instructor Course. The certificate must have been issued by an Accredited Training Company and confirm that they have attended a refreshercourse within the last 6 months.
2. You will be asked to provide your Certificates to Operate Machines for machine types for which training is intended to be delivered on. Especially those machine types which you would like to be added to your Instructor Card. ITSSAR ask that such certification has been issued within the recommended 3 – 5 years or less
3. One passport size photograph
ITSSAR Accredited Instructor Course – Direct Entry
Information: This is a 3 or 5 day course – depending upon the number of trainees attending the course.
Requirements:
1. A copy of your current Instructor Certificate must be sent to QTS prior to attending the course which must be in date.
2. A copy of the operator’s certificate of training achievement must be sent to QTS prior to attending the Instructor Course. The certificate must have been issued by an Accredited Training Company and confirm that they have attended a refresher course within the last 6 months.
3. You will be asked to provide your Certificates to Operate Machines for machine types for which training is intended to be delivered on. Especially those machine types which you would like to be added to your Instructor Card. ITSSAR ask that such certification has been issued within the recommended 3 – 5 years or less.
4. One passport size photograph
Re-Registration
All Category 1 Instructors must attend a re-registration course every five years.
Up to 6 months grace will be allowed as long as the Instructor notifies ITSSAR’s Head Office and subsequently attends a re-registration course within the 6 months time period, if no course is booked then the registration will end on the expiry date. The expiry date will run concurrent. Instructors who have exceeded these 6 months must undertake a full 10 day Instructor Course.
Assessment :
Each trainee will be assessed on the following elements throughout the course:
- Health and Safety at Work.
- Recommendations of Training
- Instructional Techniques
- Operators Ability
- Classroom Lesson
- Practical Demonstration
- Practical Lesson
- Basic Skills Test
- Report Writing
Elements 1–3 are a 55 Multi-Choice question paper and 5 open questions. A 100% pass mark is required on all theory tests.
Element 4 requires the trainee to pass an operator’s test with no more than 25 points.
Element 5 requires the trainee to demonstrate their ability to conduct a classroom lesson on a theoretical subject related to lift trucks, i.e. Rated Capacity, Stability, Health & Safety at Work Act etc. This is to assess their basic instructional techniques
Element 6 requires the trainee to carry out a demonstration on a lesson of the tutors choice related to practical lift truck operation, i.e. Figure of eight, ninety degree turns, stacking at high level etc. This is to assess them demonstrating a manoeuvre without any errors
Element 7 requires the trainee to carry out a practical lesson on a subject related to lift truck operations. This is to assess their ability on student participation, confirmation techniques, and basic instructional techniques
Element 8 requires the trainee to construct a test area and conduct and mark a basic skills test to ITSSAR standards and complete the relevant paperwork.
Element 9 requires the trainee to write a report related to lift truck operator training i.e. a report on a student who has failed a course.
Assessment on all the above elements will be carried out throughout the course. If any of the trainees are referred on any of the above elements, further assessments will be required until they pass that element. This can be done on the course given the availability of spare time within the programme or can be carried out at a later date.
ITSSAR will provide the documentation, certificate and ID Card which will confirm that they are registered as a Category 1 ITSSAR Accredited Instructor and these last for 5 years when a refresher course is required.